OB 100 set
Opto-Box 100 Set for CAN and LIN Signals
Short description
The OB 100 set is used for optical signal transmission of either CAN- and LIN-signals. During an EMC test the CAN-/LIN-Bus is galvanically isolated. For EMC measurements the probe heads are used directly on the device under test and they are powered by the assembly. On the opposite side (outside the anechoic chamber) there is the Opto-Box receiving the probe heads signals via a fibre optical cable. Alternatively, two Opto-Boxes can be used.
Scope of delivery
- 2x OB 100, Opto-Box 100
- 1x CAN 100, Optical Fiber Probe
- 1x LIN 100, Optical Fiber Probe
- 1x LWL Ø 2.2 mm 10 m, Optical Fiber, Single 10 m
- 1x NT FRI EU, Power Supply Unit
Scope of delivery details
-
OB 100
Opto-Box 100
The OB 100 Opto Box is used for optical signal transmission according to CAN- and LIN-standard (change-over switch). Via fibre optical cable the optical signals are transmitted to the distant station (either LIN 100 or CAN 100 probe head or a second Opto-Box). The LIN- or CAN-signals can be injected…
-
CAN 100
Optical Fiber Probe
The CAN 100 optical fiber probe facilitates potential free signal transmission according to CAN standards. The very small probe head is installed directly into the assembly. The bidirectional optical transmission path achieved through the double-plastic optical fiber cable is suitable for the signal…
-
LIN 100
Optical Fiber Probe
The LIN 100 optical fiber field bus allows for potential free signal transmission according to LIN standards. The very small probe head is installed directly in the assembly. The bidirectional optical transmission path achieved through a double-plastic optical fibre cable is suitable for the signal …