Technical parameters

Probes

ICR H-field probe

Vertical measuring coil
shielded measuring coil

Probe type	Inside diameter	Measurement range	Resolution
ICR HV100-27	100 µm	1.5 MHz - 6 GHz	60 µm
ICR HV100-6		2.5 MHz - 6 GHz
ICR HV150-27	150 µm	1.5 MHz - 6 GHz	80 µm
ICR HV150-6		2.5 MHz - 6 GHz
ICR HV250-75	250 µm	500 kHz - 2 GHz	110 µm
ICR HV250-6		2.5 MHz - 6 GHz
ICR HV500-75	500 µm	200 kHz - 1 GHz	300 µm
ICR HV500-6		2 MHz - 6 GHz

The particular of the probes ICR HVxxx 27/-75 are profitable in the lower frequency range.

Compare: ICR product overview

ICR H-field probe

Horizontal measuring coil
shielded measuring coil

Probe type	Indide diameter	Measurement range	Resolution
ICR HH100-27	100 µm	1.5 MHz - 6 GHz	70 µm
ICR HH100-6		2.5 MHz - 6 GHz
ICR HH150-27	150 µm	1.5 MHz - 6 GHz	100 µm
ICR HH150-6		2.5 MHz - 6 GHz
ICR HH250-75	250 µm	500 kHz - 2 GHz	150 µm
ICR HH250-6		2.5 MHz - 6 GHz
ICR HH500-75	500 µm	200 kHz - 1 GHz	300 µm
ICR HH500-6		2 MHz - 6 GHz

The particular of the probes ICR HHxxx 27/-75 are profitable in the lower frequency range.

Compare: ICR product overview

ICR E 150, E-field probe

Horizontal electrode
Dimensions of electrode: 150 x 35 µm
Measurement range: 7 MHz - 3 GHz
Resolution: 65 µm

Amplifier

Gain:	30 dB up to 3 GHz 20 dB up to 6 GHz
RF output:	50 Ohm
-1 dB Compression point:	120 dBµV
IP3:	27.0 dBm
Noise factor:	4.5 dB
Auxiliary power:	12 V +/-10%

BT 706 Bias-Tee

Power is supplied to the integrated amplifier via the bias-tee.This BT 706 has an impedance of 50 ohm and stabilises the current (9 V, 100 mA) for the ICR probe.

Frequency range:	500 KHz to 6 GHz
Connection:	SMA connector
Plug-in power supply unit	12 V / 70 mA

Note:

The bias tee from LANGER EMV-Technik features integrated voltage stabilisation at 9 V.

The ICR probes can thus only be used with this bias tee.

Properties and setup

: ICR probe body

back