Burst
- Probe 201
The probes from the 200 and 300 series are available for burst pulse injection (set up). Their dimensions depend on the burst injection mechanisms in electronic modules. The probes from the 200 series are designed for measurements on supply and GND pins. They have a much higher coupling capacitance and an extremely low resistance. They are supplied and controlled by the BPS 201 Burst Power Station.
Technical data:
Probes burst-i: | Probe 201 | Probe 211 |
|---|---|---|
Pulse shape: | 1,5 - 5 ns | 1,5 - 5 ns |
Coupling capacitance: | 1,2 µF | 1,2 µF |
Internal resistance: | 1 Ohm | 1 Ohm |
Pulse voltage: | ± 5 - 35 Volt | ± 0,5 - 5 Volt |
Technical details probe 201-211 (pdf, 196 kb)
Probes burst-u: | Probe 301 | Probe 311 | |
|---|---|---|---|
Pulse shape: | 1,5 - 20 ns | 1,5 - 20 ns | |
Coupling capacitance: | 18 µF | 18 pF | |
Internal resistance: | 100 Ohm | 100 Ohm | |
Pulse voltage: | ± 120 - 500 Volt | ± 5 - 140 Volt |
Technical details probe 301-311 (pdf, 192 kb)
Evaluation of the immunity test results on IC's with burst probes (pdf, 80 kb)
ESD
- Probe 331
The probe 331 is available for ESD pulse injection. Their dimension depend on the ESD injection mechanisms in electronic modules. The P331 is designed for measurement on all pins types. The probe are supplied and controlled by the burst power station BPS 203.
Technical data:
|
| ||
|---|---|---|---|
ESD probe burst-u: | probe 331 | ||
Pulse shape: | 0,2 / 40 ns | ||
Coupling capacitance: | 75 pF / 13,2 nF | ||
Internal resistance: | 100 Ohm | ||
Pulse voltage: | ± 200 - 9500 Volt
|